logo separator

[mkgmap-dev] map types on different devices

From Ticker Berkin rwb-mkgmap at jagit.co.uk on Wed Jan 24 11:17:55 GMT 2024

Hi

The disadvantage of using extended points is that none are findable.

I've had trouble with 0x2b (Lodgings) points showing or not on different devices
(eTrex HCx & eTrex 30x) and software and some subtype# not being findable on
different devices.

HCx has Lodgings (0x2b) "Find" categories:
0:Other,1:Hotel/Motel,2:Bed & Breakfast Inn,3:Campground/RV Park,4:Resort
 and finds 5:Other,...
30x adds 5:Campground,7:"Sporting & Instructional"
 and doesn't show subtypes 3 or 6

I've resorted to generating 2 points with different subtypes for some.

This is my usage of 0x2b:

amenity=shelter & shelter_type=basic_hut
                     [0x2b06 resolution 24 default_name 'Shelter']
tourism=alpine_hut   [0x2b07 resolution 24]
tourism=bed_and_breakfast [0x2b02 resolution 24]
# eTrex Legend & 30x use different codes for campsite, have both!
tourism=camp_site    [0x2b03 resolution 24]
                     [0x2b05 resolution 24]
tourism=caravan_site [0x2b03 resolution 24]
                     [0x2b05 resolution 24]
tourism=chalet       [0x2b02 resolution 24]
tourism=guest_house  [0x2b02 resolution 24]
tourism=hostel       [0x2b02 resolution 24]
# Have both hotel &| restaurant POIs
tourism=hotel | tourism=motel {set tmp:stopMopUp=yes}
                     [0x2b01 resolution 24 continue with_actions] 
tourism=lean_to      [0x2b05 resolution 24 default_name 'Lean-to']
tourism=wilderness_hut [0x2b07 resolution 24 default_name 'Wilderness hut']
tourism=resort       [0x2b04 resolution 24]

Ticker

On Tue, 2024-01-23 at 20:12 +0000, osm wrote:
> Garmin uses 0x11500 - 1151F for its custom POIS in many topo TYP files
> 
> You may want to check this out ; it certainly works for my GPSmap66.
> 
> r
> 
> Nick
> 
> On 23/01/2024 20:00, 7770 wrote:
> > Hi.
> > An observation, but maybe known to all mappers :-)
> > 
> > I am using self defined TYP symbols for stay over huts or shelters along
> > hiking
> > trails or in the wilderness.
> > It could be things like wildernes_hut lean_to shelter:
> > https://wiki.openstreetmap.org/wiki/Tag%3Atourism%3Dwilderness_hut
> > https://wiki.openstreetmap.org/wiki/Tag:shelter_type%3Dlean_to
> > etc.
> > 
> > For that i use the styles (points) to assign points in the group 0x2bnn  (nn
> > being a number).
> > https://wiki.openstreetmap.org/wiki/OSM_Map_On_Garmin/
> > POI_Types#Type_0x2b_(Accommodation)
> > 
> > According to the above page, eTrex devices may not show higher number than
> > 0x2b07 in that group.
> > 
> > What i notice is that GPSMAP 66s/st picks up higher values such as
> > 0x2b11-0x2b18 and displays them, whereas eTrex 32x does not pick up those
> > but
> > i have to map the same symbols/icons to lower numbers (which not all are
> > free). E.g., 0x2b07 works. I yet have to try exactly where the cut off is.
> > 
> > Even if the eTrex 32x does not show the symbol on the map, at least some of
> > the points can be searched for. If i have the map pointer close to the point
> > and search for "all points" the points will show up in the list of close by
> > points. But they do not show up under "lodging" category.
> > 
> > Does anyone have additional details or guidance that i could read to see if
> > i
> > can find better numbers to assign so that the self made TYP definitions
> > would
> > show up on the etrex 32x device?
> > 
> > Regards
> > Karl
> > 
> > 
> > _______________________________________________
> > mkgmap-dev mailing list
> > mkgmap-dev at lists.mkgmap.org.uk
> > https://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
> _______________________________________________
> mkgmap-dev mailing list
> mkgmap-dev at lists.mkgmap.org.uk
> https://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev



More information about the mkgmap-dev mailing list