logo separator

[mkgmap-dev] Splitter only writes points, not ways on huge file?

From Felix Hartmann extremecarver at gmail.com on Fri May 28 18:29:31 BST 2021

Attached the full splitter.log - looks fine. Is it most likely that the
error is on phyghtmap?

On Fri, 28 May 2021 at 13:12, Felix Hartmann <extremecarver at gmail.com>
wrote:

> running now again with resolution 13, I had tried if changing resolution
> to 12 would solve the problem - but is does not.
>
> On Fri, 28 May 2021 at 13:11, Felix Hartmann <extremecarver at gmail.com>
> wrote:
>
>> Asia.poly is attached - I did not save the splitter.log - doing this
>> right now (but will take some hours - splitting this huge file takes a lot
>> of time)
>>
>> The log starts with:
>> Splitter version 597 compiled 2020-01-30T14:10:47+0000
>> boundary-tags=use-exclude-list
>> cache=
>> description=
>> geonames-file=
>> handle-element-version=remove
>> ignore-osm-bounds=false
>> keep-complete=true
>> mapid=75400000
>> max-areas=2048
>> max-nodes=12000000
>> max-threads=7
>> mixed=false
>> no-trim=true
>> num-tiles=
>> output=pbf
>> output-dir=
>> overlap=auto
>> polygon-desc-file=
>> polygon-file=
>> precomp-sea=
>> problem-file=
>> problem-report=
>> resolution=13
>> route-rel-values=
>> search-limit=200000
>> split-file=
>> status-freq=120
>> stop-after=dist
>> wanted-admin-level=5
>> write-kml=
>> Elapsed time: 0s   Memory: Current 1012MB (7MB used, 1005MB free) Max
>> 25000MB
>> Time started: Fri May 28 12:06:59 CEST 2021
>> Map is being split for resolution 13:
>>  - area boundaries are aligned to 0x800 map units (0.0439453125 degrees)
>>  - areas are multiples of 0x800 map units wide and high
>> Processing asia10m_.osm.pbf
>> Bounding box -179.99990000000003 -13.011650000000001 179.99990000000003
>> 84.52666
>> 10,000,000 nodes parsed... id=19999999
>> 20,000,000 nodes parsed... id=29999999
>> 30,000,000 nodes parsed... id=39999999
>> 40,000,000 nodes parsed... id=49999999
>> 50,000,000 nodes parsed... id=59999999
>> 60,000,000 nodes parsed... id=69999999
>> 70,000,000 nodes parsed... id=79999999
>> 80,000,000 nodes parsed... id=89999999
>> 90,000,000 nodes parsed... id=99999999
>> 100,000,000 nodes parsed... id=109999999
>>
>> On Fri, 28 May 2021 at 12:25, Gerd Petermann <
>> gpetermann_muenchen at hotmail.com> wrote:
>>
>>> Hi Felix,
>>>
>>> the pbf file really contains only nodes.
>>> Can you attach the splitter log file and the asia.poly, please?
>>>
>>> Gerd
>>>
>>> ________________________________________
>>> Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk> im Auftrag von
>>> Felix Hartmann <extremecarver at gmail.com>
>>> Gesendet: Freitag, 28. Mai 2021 11:18
>>> An: Development list for mkgmap
>>> Betreff: Re: [mkgmap-dev] Splitter only writes points, not ways on huge
>>> file?
>>>
>>> Hi Gerd,
>>> sorry - fixed. I attached the file. I could also put the whole 60GB file
>>> for analysis. But do not know if you could download such a huge file or
>>> analyse it better.
>>> https://openmtbmap.org/75400407.osm.pbf
>>>
>>> Felix
>>>
>>> On Fri, 28 May 2021 at 09:03, Gerd Petermann <
>>> gpetermann_muenchen at hotmail.com<mailto:gpetermann_muenchen at hotmail.com>>
>>> wrote:
>>> Hi Felix,
>>>
>>> the link to the pbf file seems to be wrong?  I get an 404
>>>
>>> Gerd
>>>
>>> ________________________________________
>>> Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:
>>> mkgmap-dev-bounces at lists.mkgmap.org.uk>> im Auftrag von Felix Hartmann <
>>> extremecarver at gmail.com<mailto:extremecarver at gmail.com>>
>>> Gesendet: Freitag, 28. Mai 2021 07:56
>>> An: Development list for mkgmap
>>> Betreff: [mkgmap-dev] Splitter only writes points, not ways on huge file?
>>>
>>> I used phyghtmap to create a huge file (60GB) of 10m equidistance
>>> osm.pbf contourlines data.
>>>
>>> phyghtmap --jobs=2 --polygon=/home/contourlines/bounds/asia.poly
>>> --step=10  --no-zero-contour --void-range-max=-420
>>> --output-prefix="Asia10m" --line-cat=500,100--start-node-id=10000000
>>> --start-way-id=10000000 --source=view1,srtm1,view3,srtm3
>>> --max-nodes-per-way=230 --max-nodes-per-tile=0 --pbf
>>>
>>> I am not fully sure that this pbf file is correct, but I created it
>>> exactly the same way as smaller countries. Maybe its also phyghtmap going
>>> wrong. But I doubt it with phyghtmaps incremental approach of just
>>> constantly writing out data.
>>>
>>> When splitting it with splitter - and opening up one of the osm.pbf
>>> files in JOSM - I noticed it contains only the contourline nodes, no lines.
>>> I think the Asia continent file spans 360 degrees - so maybe that causes
>>> problems with splitter?
>>>
>>>
>>>
>>> I have uploaded a splitted file here:
>>> https://openmtbmap.org/75400407.osm.pbf
>>> If you load it in Josm, you will notice it is alll the points but no
>>> lines...
>>>
>>> --
>>> Felix Hartman - Openmtbmap.org & VeloMap.org
>>>
>>> _______________________________________________
>>> mkgmap-dev mailing list
>>> mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>
>>> https://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
>>>
>>>
>>> --
>>> Felix Hartman - Openmtbmap.org & VeloMap.org
>>>
>>> _______________________________________________
>>> mkgmap-dev mailing list
>>> mkgmap-dev at lists.mkgmap.org.uk
>>> https://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
>>>
>>
>>
>> --
>> Felix Hartman - Openmtbmap.org & VeloMap.org
>>
>>
>
> --
> Felix Hartman - Openmtbmap.org & VeloMap.org
>
>

-- 
Felix Hartman - Openmtbmap.org & VeloMap.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.mkgmap.org.uk/pipermail/mkgmap-dev/attachments/20210528/2606c266/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: splitter.log
Type: application/octet-stream
Size: 1375438 bytes
Desc: not available
URL: <http://www.mkgmap.org.uk/pipermail/mkgmap-dev/attachments/20210528/2606c266/attachment-0001.obj>


More information about the mkgmap-dev mailing list