logo separator

[mkgmap-dev] mkgmap-dev Digest, Vol 143, Issue 54

From Joris Bo jorisbo at hotmail.com on Mon Jun 22 11:02:27 BST 2020

Hi Pierre,

It still sounds strange that there are tiles missing at certain zoomlevels if you really renamed/deleted/removed all other maps from your device.
Disabling maps through the device menu’s is not enough. The full maps should be unrecognizable renamed or removed on filesystem (through windows explorer) from both the device as also the internal ssd card to be sure no other map is still interfering with your newly created tiles.

If you say “ I've changed the mapid of all tiles” That sounds to me as if you did this manually or with a tool afterwords?
The mapid is part of the splitter process. In order to have a clean start you should best both use splitter and mkgmap again form scratch to build your new map wit the new unique mapid=<8digits> passed to splitter.

If you also install your maps in your registry or basecamp you can use javawa tool (javawa GMTK) to look for errors.
https://www.javawa.nl/downloads/software/GMTK_Setup.exe

To just examine your device for maps and errors java device manager can hint for problems
https://www.javawa.nl/downloads/software/JDM_Setup.exe


At least good to hear you can at least use it.

Kind regards,
Joris


Van: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk> Namens Pierre Brico
Verzonden: maandag 22 juni 2020 11:03
Aan: Development list for mkgmap <mkgmap-dev at lists.mkgmap.org.uk>
CC: john at the-thorns.org.uk
Onderwerp: Re: [mkgmap-dev] mkgmap-dev Digest, Vol 143, Issue 54


Hi,

I just would like to give you some feedback against the missing tile issue. As a reminder, my Garmin device is a GPSMAP 66s.

I've changed the mapid of all tiles of France map to avoid overlapping with the Belgium map I'm also using. Since this change, all tiles are displayed properly. However at large scale (120km or 80km), some tiles are still missing but I think this should be an issue with the 66s. The good news is that when I zoom in, the missing tiles appear which was not the case before. And as I'm using the scale 200m or 120m during my hiking or cycling trips, that's not a problem anymore.

I've searched for a limit of tiles for a map but I didn't find one. For custom maps KMZ, it seems to be a limit of 100 tiles (https://support.garmin.com/en-CA/?faq=1Bz6TOQfUJ65zKV2l9IYAA) but it shouldn't apply to the img map. My France map and the OpenTopoMap of France have 120 tiles...

Thanks again for your help,
Pierre


On Wed, Jun 17, 2020 at 11:02 PM Gerd Petermann <gpetermann_muenchen at hotmail.com<mailto:gpetermann_muenchen at hotmail.com>> wrote:
Hi Pierre,

please don't attach more screenshots, they are the reason that mails are not forwarded immediately.
The easiest way to set the mapid is the option in splitter. As long as you use only your own maps and those from Garmin you can use any id.
Did you check how many tiles are contained in the open-topo map for France? Maybe John is right and the number is the limit.
If you don't need a full map of France for your journey maybe use a polygon for splitter to cut the area you need.

Gerd

________________________________________
Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk>> im Auftrag von Pierre Brico <pierre.brico at gmail.com<mailto:pierre.brico at gmail.com>>
Gesendet: Mittwoch, 17. Juni 2020 15:42
An: Development list for mkgmap
Cc: john at the-thorns.org.uk<mailto:john at the-thorns.org.uk>
Betreff: Re: [mkgmap-dev] mkgmap-dev Digest, Vol 143, Issue 54


Hi Gerd,

I've removed all my maps except the gmapbmap.img and gmaptz.img which were provided with the GPS itself.

The result is better: some tiles are still missing when displaying the map at high scale BUT when I zoom in on those tiles, the map appears. Here are 2 screenshots.

High scale:
[327.bmp]

Zoom in on the missing area:
[338.bmp]


If the problem comes from the mapid, how can I rename default 63240001, 63240002 to whatever values ? (I would like to be able to load Belgium maps with the France one).

Thanks,
Pierre


On Wed, Jun 17, 2020 at 3:17 PM Gerd Petermann <gpetermann_muenchen at hotmail.com<mailto:gpetermann_muenchen at hotmail.com><mailto:gpetermann_muenchen at hotmail.com<mailto:gpetermann_muenchen at hotmail.com>>> wrote:
Hi Pierre,

Did you make sure that there is no other map on this device which contains equal mapids?
Since you use the default 63240001, 63240002 I wonder if you also created another map with one of these ids. If that is possible, make sure to use a different id simply rename the other gmapsupp files from *.img to e.g. *.img_
It is not sufficient to disable the map.

Gerd

________________________________________
Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk>>> im Auftrag von Pierre Brico <pierre.brico at gmail.com<mailto:pierre.brico at gmail.com><mailto:pierre.brico at gmail.com<mailto:pierre.brico at gmail.com>>>
Gesendet: Mittwoch, 17. Juni 2020 15:10
An: john at the-thorns.org.uk<mailto:john at the-thorns.org.uk><mailto:john at the-thorns.org.uk<mailto:john at the-thorns.org.uk>>; Development list for mkgmap
Betreff: Re: [mkgmap-dev] mkgmap-dev Digest, Vol 143, Issue 54


Hi John,

Thanks for your suggestion. But in my case, the same map of France coming from OpenTopoMap is working perfectly. So I don't think that the tiles limit has been reached.

Pierre


On Mon, Jun 15, 2020 at 3:56 PM John Thorn <johnrthorn at gmail.com<mailto:johnrthorn at gmail.com><mailto:johnrthorn at gmail.com<mailto:johnrthorn at gmail.com>><mailto:johnrthorn at gmail.com<mailto:johnrthorn at gmail.com><mailto:johnrthorn at gmail.com<mailto:johnrthorn at gmail.com>>>> wrote:
Just a thought....

Is it a case of too many tiles on the device? Most devices have a limit on the number of tiles across all installed maps. Often c4000.

John

On Mon, 15 Jun 2020 at 13:09, <mkgmap-dev-request at lists.mkgmap.org.uk<mailto:mkgmap-dev-request at lists.mkgmap.org.uk><mailto:mkgmap-dev-request at lists.mkgmap.org.uk<mailto:mkgmap-dev-request at lists.mkgmap.org.uk>><mailto:mkgmap-dev-request at lists.mkgmap.org.uk<mailto:mkgmap-dev-request at lists.mkgmap.org.uk><mailto:mkgmap-dev-request at lists.mkgmap.org.uk<mailto:mkgmap-dev-request at lists.mkgmap.org.uk>>>> wrote:
Send mkgmap-dev mailing list submissions to
        mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>>>

To subscribe or unsubscribe via the World Wide Web, visit
        http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
or, via email, send a message with subject or body 'help' to
        mkgmap-dev-request at lists.mkgmap.org.uk<mailto:mkgmap-dev-request at lists.mkgmap.org.uk><mailto:mkgmap-dev-request at lists.mkgmap.org.uk<mailto:mkgmap-dev-request at lists.mkgmap.org.uk>><mailto:mkgmap-dev-request at lists.mkgmap.org.uk<mailto:mkgmap-dev-request at lists.mkgmap.org.uk><mailto:mkgmap-dev-request at lists.mkgmap.org.uk<mailto:mkgmap-dev-request at lists.mkgmap.org.uk>>>

You can reach the person managing the list at
        mkgmap-dev-owner at lists.mkgmap.org.uk<mailto:mkgmap-dev-owner at lists.mkgmap.org.uk><mailto:mkgmap-dev-owner at lists.mkgmap.org.uk<mailto:mkgmap-dev-owner at lists.mkgmap.org.uk>><mailto:mkgmap-dev-owner at lists.mkgmap.org.uk<mailto:mkgmap-dev-owner at lists.mkgmap.org.uk><mailto:mkgmap-dev-owner at lists.mkgmap.org.uk<mailto:mkgmap-dev-owner at lists.mkgmap.org.uk>>>

When replying, please edit your Subject line so it is more specific
than "Re: Contents of mkgmap-dev digest..."
Today's Topics:

   1. Re: Tiles missing (Joris Bo)
   2. Re: Tiles missing (Pierre Brico)



---------- Forwarded message ----------
From: Joris Bo <jorisbo at hotmail.com<mailto:jorisbo at hotmail.com><mailto:jorisbo at hotmail.com<mailto:jorisbo at hotmail.com>><mailto:jorisbo at hotmail.com<mailto:jorisbo at hotmail.com><mailto:jorisbo at hotmail.com<mailto:jorisbo at hotmail.com>>>>
To: Development list for mkgmap <mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>>>>
Cc:
Bcc:
Date: Mon, 15 Jun 2020 11:39:50 +0000
Subject: Re: [mkgmap-dev] Tiles missing
Hi Brico,

Does your newly created map displays in basecamp correctly?
If no: The start is to find out why tiles are skipped by mkgmap or splitter by investigating the error logging  (This is the tip of Ticker)
If yes: A start could be to disable all maps on your device by renaming the *.IMG extension to *._IMG except your own map.
You can find the maps on both the device as the SSD in the map garmin

If you created the maps the most straight forward way (without specifying family id and tile number start for example) you can easily create duplicate tile numbers which could conflict with other mapmakers. Default all tiles start with 6324xxx1



Van: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk>><mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk>>>> Namens Pierre Brico
Verzonden: zondag 14 juni 2020 18:16
Aan: Development list for mkgmap <mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>>>>
Onderwerp: Re: [mkgmap-dev] Tiles missing


Yes, my GPSMAP 66s runs the latest firmware (4.20 see https://www8.garmin.com/support/download_details.jsp?id=14337).

Note that the France OpenTopoMap on the same device is working properly.

I can also try the map on my 64s if this can help to identify the problem...


On Sun, Jun 14, 2020 at 3:46 PM Ralf Kleineisel <ralf at kleineisel.de<mailto:ralf at kleineisel.de><mailto:ralf at kleineisel.de<mailto:ralf at kleineisel.de>><mailto:ralf at kleineisel.de<mailto:ralf at kleineisel.de><mailto:ralf at kleineisel.de<mailto:ralf at kleineisel.de>>>> wrote:
Hi,

Am 13.06.20 um 11:41 schrieb Pierre Brico:

> A few months ago, I bought a Garmin GPSMAP 66s (I've already other

> Now I would like to generate a map for my next holiday in France but I
> have issues with missing tiles.

does your device run the latest firmware? I had weird display problems
with older firmware on my 64s.



_______________________________________________
mkgmap-dev mailing list
mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>>>
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev



---------- Forwarded message ----------
From: Pierre Brico <pierre.brico at gmail.com<mailto:pierre.brico at gmail.com><mailto:pierre.brico at gmail.com<mailto:pierre.brico at gmail.com>><mailto:pierre.brico at gmail.com<mailto:pierre.brico at gmail.com><mailto:pierre.brico at gmail.com<mailto:pierre.brico at gmail.com>>>>
To: Development list for mkgmap <mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>>>>
Cc:
Bcc:
Date: Mon, 15 Jun 2020 14:08:28 +0200
Subject: Re: [mkgmap-dev] Tiles missing

Hi Joris,

I didn't install the map in basecamp but if it can help, I will.

On my device I've moved all maps in a separated directories to disable them. The only one left was mine.

To create the France map, I started from belgium-latest.osm.pbf downloaded from geofabrik.de<http://geofabrik.de><http://geofabrik.de><http://geofabrik.de>. Then I splitted it using splitter (r597) tool and then generated the map with mkgmap (r4525). The mkgmap command line option was:

java -Xmx8G -jar $MKGMAP_DIR/mkgmap.jar --gmapsupp \
--family-id=$FAMILY_ID \
--product-id=0 \
--product-version=1 \
--draw-priority=20 \
--family-name="OSM $COUNTRY_ISO" \
--series-name="OSM $COUNTRY_ISO" \
--country-name="$COUNTRY" \
--country-abbr="$COUNTRY_ISO" \
--max-jobs=8 \
--latin1 \
--index \
--split-name-index \
--housenumbers \
--reduce-point-density=4 \
--reduce-point-density-polygon=8 \
--min-size-polygon=8 \
--polygon-size-limits="24:12, 18:10, 16:8, 14:4, 12:2, 11:0" \
--route \
--make-opposite-cycleways \
--add-pois-to-areas \
--process-destination \
--process-exits \
--order-by-decreasing-area \
--keep-going \
--style-file=$MKGMAP_DIR/resources/styles --style=default \
--bounds=$BOUNDS_FILE \
--precomp-sea=$SEA_FILE \
-c template.args ../typ/2000.typ \
--description="OSM custom routable(${COUNTRY_ISO}_$(date "+%d-%m-%Y"))"

with template.args coming from the splitter step.

Note that I've identified a (amongst several) missing tile and the name of the tile was in the template.args. Moreover, the tile which doesn't display on my device, is shown by GMapTool on the final IMG.

Thanks for your help,
Pierre





On Mon, Jun 15, 2020 at 1:39 PM Joris Bo <jorisbo at hotmail.com<mailto:jorisbo at hotmail.com><mailto:jorisbo at hotmail.com<mailto:jorisbo at hotmail.com>><mailto:jorisbo at hotmail.com<mailto:jorisbo at hotmail.com><mailto:jorisbo at hotmail.com<mailto:jorisbo at hotmail.com>>>> wrote:
Hi Brico,

Does your newly created map displays in basecamp correctly?
If no: The start is to find out why tiles are skipped by mkgmap or splitter by investigating the error logging  (This is the tip of Ticker)
If yes: A start could be to disable all maps on your device by renaming the *.IMG extension to *._IMG except your own map.
You can find the maps on both the device as the SSD in the map garmin

If you created the maps the most straight forward way (without specifying family id and tile number start for example) you can easily create duplicate tile numbers which could conflict with other mapmakers. Default all tiles start with 6324xxx1



Van: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk>><mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk>>>> Namens Pierre Brico
Verzonden: zondag 14 juni 2020 18:16
Aan: Development list for mkgmap <mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>>>>
Onderwerp: Re: [mkgmap-dev] Tiles missing


Yes, my GPSMAP 66s runs the latest firmware (4.20 see https://www8.garmin.com/support/download_details.jsp?id=14337).

Note that the France OpenTopoMap on the same device is working properly.

I can also try the map on my 64s if this can help to identify the problem...


On Sun, Jun 14, 2020 at 3:46 PM Ralf Kleineisel <ralf at kleineisel.de<mailto:ralf at kleineisel.de><mailto:ralf at kleineisel.de<mailto:ralf at kleineisel.de>><mailto:ralf at kleineisel.de<mailto:ralf at kleineisel.de><mailto:ralf at kleineisel.de<mailto:ralf at kleineisel.de>>>> wrote:
Hi,

Am 13.06.20 um 11:41 schrieb Pierre Brico:

> A few months ago, I bought a Garmin GPSMAP 66s (I've already other

> Now I would like to generate a map for my next holiday in France but I
> have issues with missing tiles.

does your device run the latest firmware? I had weird display problems
with older firmware on my 64s.



_______________________________________________
mkgmap-dev mailing list
mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>>>
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________
mkgmap-dev mailing list
mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>>>
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________
mkgmap-dev mailing list
mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>>>
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________
mkgmap-dev mailing list
mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>>>
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________
mkgmap-dev mailing list
mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>>
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________
mkgmap-dev mailing list
mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.mkgmap.org.uk/pipermail/mkgmap-dev/attachments/20200622/3e515c53/attachment-0001.html>


More information about the mkgmap-dev mailing list