[mkgmap-dev] Routing through bollard

Sat Oct 3 21:24:33 BST 2009

Ralf Reimann wrote:
> Hi Mark,
>
>     You need to have access tags added to the bollard so that they can be
>     transferred to the way. Does your points file have lines like these in
>     it?
>     barrier=bollard {add access = no; add bicycle = yes; add foot =
>     yes} [0x660f resolution 20]
>     barrier=cycle_barier {add access = no; add bicycle = yes; add foot
>     = yes} [0x660f resolution 20]
>
>
> I used the the default style file included. The last entries in points 
> are:
> barrier=bollard | barrier=bus_trap
>     {add access = no; add bicycle = yes; add foot = yes} [0x660f 
> resolution 21]
> barrier=block | barrier=cycle_barier | barrier=stile | 
> barrier=kissing_gate
>     {add access = no; add foot = yes} [0x660f resolution 21]
>
>
> Ralf
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> mkgmap-dev mailing list
> mkgmap-dev at lists.mkgmap.org.uk
> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
put them first not last in your points file. Otherwise if there is 
another entry higher up on the same point, it will not work.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.mkgmap.org.uk/pipermail/mkgmap-dev/attachments/20091003/7a6078f1/attachment.html